If you’re in the industrial fire protection space, you know anti-explosion fire monitors aren’t like standard residential sprinkler heads—these heavy-duty devices stand guard in high-risk zones: oil refineries, chemical processing plants, offshore drilling rigs, and grain elevators. Their job is to deliver high-volume water, foam, or dry chemical at precise angles, and any layer of dust, grease, or burnt residue can throw off their aim, reduce flow rate, or even fail during a crisis. As a supplier of these specialized monitors, I’ve worked with dozens of facility maintenance teams who’ve overlooked cleaning protocols, only to face costly downtime or, worse, a monitor that didn’t activate when it mattered. Today, I’m breaking down exactly how to clean an anti-explosion fire monitor correctly, so you keep your life safety equipment in peak working order. Anti-Explosion Fire Monitor

First, a quick note: anti-explosion monitors are engineered to meet strict standards—like ATEX, IECEx, or NEC Class I, Division 1 for hazardous areas—so any cleaning method can’t compromise that protection. You can’t just spray a monitor with a garden hose or use harsh chemicals that eat at its explosion-proof seals. That’s a mistake I’ve seen more than once; one refinery I work with tried pressure-washing their monitors during a routine shutdown, and water seeped into the junction box, ruining the explosion-proof rating. It took a week to replace the seal and recertify the unit, costing them thousands in lost production. So safety first: always check the manufacturer’s manual for your specific model, and if you’re unsure about compatibility, reach out to a certified technician before starting.
Let’s start with pre-cleaning prep. You never want to work on a fire monitor that’s live or connected to a water supply. The first step is to isolate the unit: shut off the main water line to the monitor, drain all remaining water from the piping to prevent sloshing during cleaning, and lock out/tag out (LOTO) the electrical supply if your monitor is electric. This is non-negotiable, not just for safety, but because some anti-explosion monitors have delicate components—like flame sensors or motorized rotation gears—that can be damaged by sudden water pressure or electrical surges. Next, gather your tools: soft-bristle nylon brushes (never metal, which can scratch the monitor’s housing or spark), lint-free microfiber cloths, pH-neutral industrial cleaner (avoid anything acidic or alkaline stronger than 7, and never use bleach, which corrodes metal), a small compressed air canister (with a nozzle to direct air without damaging parts), a set of Allen wrenches or screwdrivers matched to your monitor’s bolts, and a container of clean, deionized water (tap water has minerals that can leave spots on precision parts). If your monitor has a foam chamber or dry chemical component, keep those separate—we’ll cover that later.
Now, step-by-step cleaning, starting with the exterior housing, which is the most exposed part. Anti-explosion monitors are usually made of cast aluminum or stainless steel, coated with a corrosion-resistant finish to withstand harsh environments. Start by gently brushing away loose debris: dust, cotton lint, and burnt hydrocarbon residue that’s settled on the housing. Don’t scrub too hard here—you don’t want to scratch the explosion-proof enclosure, which is designed to contain any internal sparks. Next, mix a small amount of pH-neutral cleaner with deionized water, dampen your microfiber cloth (it should be just damp, not dripping), and wipe the housing in circular motions, focusing on areas around the junction box, control knobs, and mounting flanges—these are where grime builds up fastest. If there’s caked-on grease (common in refineries), you can use a soft nylon brush to gently scrub the area, then follow up with a damp cloth to remove the cleaner. Avoid getting water directly into the junction box: if your monitor has a weatherproof cap, leave it in place unless you’re cleaning the electrical connectors, and if you do need to access the connectors, only use a slightly damp cotton swab to wipe them, then immediately dry them with compressed air.
Next, the monitor’s nozzle and swivel assembly—this is the part that delivers water, and even a small blockage or rough surface can reduce flow by 20% or more, per our internal testing at the supplier. First, remove the nozzle: most anti-explosion nozzles are secured with a simple bolt, so use your Allen wrench to loosen it, then pull it off carefully. If the nozzle is clogged with debris, don’t poke it with a metal object—use a soft nylon brush to gently dislodge material, or soak the nozzle in deionized water for 15 minutes if the clog is tough. For stubborn residue (like dried foam), you can add a tiny bit of the pH-neutral cleaner to the soak water, again making sure the cleaner is compatible with the nozzle’s material (most are brass or bronze, which react poorly to harsh chemicals). Once the nozzle is clean, inspect the inner bore for scratches or corrosion—if you see any, that’s a sign it’s time for a replacement, not just a clean.
Now the swivel assembly, which lets the monitor rotate vertically and horizontally. This part has moving parts that can seize up if clogged with dust or grease. Use your compressed air to blow out any loose debris from the swivel joints, then wipe the surfaces with a dry microfiber cloth. If the swivel is stiff, you can add a tiny amount of food-grade silicone lubricant (never oil-based lubricants, which attract dust and can damage explosion-proof seals) to the joints—just a single drop, too much will make a mess and attract grime. Important: don’t lubricate the explosion-proof seals themselves—those are designed to work without extra lubrication, and adding anything to them can compromise their ability to contain sparks. If you see cracks or tears in the seals, replace them immediately; we stock seal kits for all our monitor models, and it’s a quick, low-cost fix that prevents big problems down the line.
What about monitors used with foam or dry chemical? Those have separate chambers, and cleaning them requires extra care. For foam-type monitors, after draining the foam concentrate from the chamber, rinse it three times with deionized water to remove all residue, then let it air dry completely before storing or using it. Foam residue can react with new foam concentrate and reduce its fire-fighting effectiveness, so even a small leftover amount can cause a problem. For dry chemical monitors, don’t use water at all—instead, use compressed air to blow out any caked dry chemical from the chamber, and use a soft brush to clean the inner walls. Water and dry chemical (which is often potassium bicarbonate) react chemically, creating a corrosive sludge that damages the monitor’s internal parts.
Once you’ve cleaned all parts, it’s time for reassembly and testing. First, make sure all components are completely dry—any moisture left in the piping or swivel joints can lead to corrosion. Reattach the nozzle, tightening the bolt just enough to hold it in place (over-tightening can warp the nozzle and throw off the spray pattern). Restore power to the monitor (following LOTO procedures, of course) and turn it on at low pressure to test the flow. Check that the spray pattern is uniform—if it’s uneven, the nozzle might be misaligned, or there could still be a small clog. Run the monitor through a full rotation (both vertical and horizontal) to make sure the swivel is moving smoothly, and listen for any unusual noises—grinding or squealing means you need to recheck the lubrication or swivel joints. Finally, document the cleaning: note the date, any parts you replaced, and the test results. For facilities with regular audits, this documentation is required to keep your fire protection system certified.
I can’t stress enough how often I hear from clients who wait too long to clean their anti-explosion monitors. We recently serviced a refinery where their monitors hadn’t been cleaned in two years—one nozzle was so clogged with carbon residue that it barely sprayed water, and the swivel on another was seized completely, so it couldn’t move to target a fire. The good news is that this is a preventable issue: a quarterly visual check and a deep clean twice a year (or after every use, if the monitor was activated) will keep your equipment working.

If you’re not sure how to inspect or clean your specific anti-explosion fire monitor, don’t guess—reach out to a certified technician, or connect with our team. We work with facilities across industries, and we can help you create a custom cleaning schedule that fits your operational needs, from high-frequency chemical plants to offshore rigs where downtime is a major concern. Whether you need replacement parts, a routine service, or advice on maintaining your monitors to meet safety standards, we’re here to help you keep your life safety equipment in peak condition.
Fire Protection Valve References
- National Fire Protection Association. (2022). Standard for Water-Based Fire Protection Systems (NFPA 15). Quincy, MA: National Fire Protection Association.
- International Electrotechnical Commission. (2021). Explosion-Protected Equipment for Use in Hazardous Locations (IEC 60079 series). Geneva, Switzerland: International Electrotechnical Commission.
- Factory Mutual Global. (2020). Inspection, Testing, and Maintenance of Fire Protection Equipment for Hazardous Locations. Rhode Island, RI: Factory Mutual Insurance Company.
- Our internal technical manual for anti-explosion fire monitors (AM-EX-2024). Custom published for industrial fire protection systems.
Nonfir Automatic Sprinkler Co., Ltd.
As one of the most professional anti-explosion fire monitor manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy advanced anti-explosion fire monitor at competitive price from our factory.
Address: No.8, Yuanfeng Road, Meiyuan Village, Kangmei Town, Nan’An City, Quanzhou City, Fujian Province, China
E-mail: info@nfsprinkler.com
WebSite: https://www.nonfirsprinklers.com/